High end office buildings provide high and low temperature test boxes

High and low temperature test chambers are generally placed in the laboratory to uate the high and low temperature resistance of products. With the development of various industries, the performance of products is becoming increasingly strict. This has driven the application range of high and low temperature test chambers, gradually extending from various mechanical industries and research institutions to more fields. Nowadays, many users have placed high and low temperature test boxes in office buildings, so there is a problem. Can the elevators and door equipment in the office building enter?

The general standard is that it is difficult to enter office buildings. In order to meet the customer's requirements. Manufacturers of high and low temperature test chambers can produce component types. 1. Place the test box controller on the top, and the width on the left and right sides can be reduced by about 20 centimeters. 2. Disassemble the test chamber studio from the refrigeration system, and the height can be reduced by half of the total height of the equipment.

Therefore, when selecting a high and low temperature test chamber, users not only need to consider the test, but also the location of the test chamber. If the door size and elevator size are not enough, can the doors and windows be removed, and can lifting be used. If it is not possible, a suitable volume of test chamber should be selected based on the test and door size to make it into a detachable high and low temperature test chamber on the left, right, or up and down sides. These all require detailed communication and confirmation between users and manufacturers.